Analyze the quality of the marking machine and the process of production assembly

Analyze the quality of the marking machine and the process of production assembly

When it comes to beverage professionals, people generally think of some large brand companies, such as Pepsi, Unified, etc., but rarely pay attention to the heroes behind the brand companies. Although their original intention may be just to get a piece of the pie, the resulting lack of consequences disrupts the normal order of the market, and so does the label machine profession. Such enterprises generally do not have a regular production workshop, the number of the company is not not planning, there is a list of hiring a large number of temporary workers, no list of the company up and down dozens of people. First connect with the tray loading organization and transport; The position of the electric eye should be adjusted to the exit point at the upper end of the outlet to ensure that the butt transport can always be opened, so that the bottle sample can always be hooked out by the fixture; Put the label sample, schedule the guardrail at both ends, and then adjust the exit side and upper limit sheet metal spacing, so that the sample can pass normally, but can be stuck at the exit (can be transported fixtures hook out); The buffer rack should be straight

The orientation of the photographed tissue should be adjusted so that the label film can be properly pressed into place; Scheduling plate loading organization, into the sample, scheduling the height of the material bar, so that it can block the sample without friction to the surface of the turntable; The temperature of the electric shortening furnace organization should be adjusted to shorten the film to non-crease, the temperature is determined according to the raw material of the film, ", all operation debugging when opening, mainly to adjust the continuous synchronization of the operation of the marking machine, and each group of fixtures is good or bad, if some groups of fixtures are not covered with the same sample, first adjust the orientation of the fixture, and adjust the fine-tuning fixture if not;

Together, most of their equipment is quite cheap, so the quality of the product will not be considered too much, and even in the follow-up service may not be timely follow-up, which will make the beverage production enterprises have a bad impression on the whole set of label machine profession. Price competition will also make the shopping mall more and more chaotic, so that enterprises in the process of choosing the label machine will also present sensory errors. The quality and stability of the label machine are the guarantee of the operation of the equipment, and the maintenance and protection of the equipment is the necessary method to extend the service life of the label machine. Our many years of production experience, some summarized the maintenance and protection methods of the marking machine:

After long-term operation of the active marking machine, the machine is closed after the temperature drops to avoid high temperature damage to the marking machine. For the marking machine with 48 efficiency operation, the oil should be added every 2 days. In order to ensure a qualified indoor working environment, the marking machine should be placed in a ventilated and dry environment. "Keep the room temperature between 20~27.2 degrees if the marking machine generally operates for 48 hours, you need to add 6.# oil on each moving part, especially the gearbox, bearings, gear, which is the key to the marking machine operation, it is necessary to regularly protect and maintain in order to ensure the production efficiency and better operation of the marking machine, it is necessary to regularly decontaminate the high temperature belt. If the machine parts are badly worn, it is necessary to replace them in time.

Set of standard machine manufacturers

Do a good job of cleaning the marking machine, the equipment in the operation is easy to inhale dust, so the marking machine should be cleaned to remove the dust, not only should be unplugged, but also covered with cloth to avoid dust falling on the marking machine.

When placing the label on the material rack, the label film must be aligned with the center touch and adjust the electric eye orientation of the tail so that it can pull the film normally; Schedule the orientation of the electric eye between the cutter head, so that the marking mechanism and the center column can put the film just on the fixture, so that the fixture will not touch the above tissue;

The center column shall be clamped together by the lifting organization and the marking mechanism to achieve 3 points and 1 line; Docking transport system

The orientation of the photographed tissue should be adjusted so that the label film can be properly pressed into place; Scheduling plate loading organization, into the sample, scheduling the height of the material bar, so that it can block the sample without friction to the surface of the turntable; The temperature of the electric shortening furnace organization should be adjusted to shorten the film to be crease free, the temperature is determined according to the raw material of the film, "", the whole operation debugging is mainly to adjust the continuous synchronization of the operation of the marking machine, and each group of fixtures is good or bad, if some groups of fixtures are not covered with the same sample, first adjust the orientation of the fixture, and adjust the fine-tuning fixture when it is not possible;